Bosch KTL Serie Montage- Und Gebrauchsanleitung Seite 21

9. Unscrew the feet (6).
10. Unscrew the 3 screws (7).
11. Remove the bottom hinge (8).
12. Unscrew the nut (9) and pull out the bolt (10).
13. Insert the bolt (10) into the left boring and apply the
nut (9) and tighten.
14. Apply the bottom hinge (8) and apply 3 the
screws (7) and tighten.
15. Screw the feet (6) into the bottom hinge (8).
16. Attach the appliance door to the bottom hinge (8).
17. Apply the 2 screws (4) and tighten.
18. Apply the top hinge (5) and apply the 2 screws (3)
and tighten.
19. Turn the appliance upright again.
20. Mount the cover panel (2) at the front and lay it flat
on the rear.
21. Apply the 2 screws (1) and tighten.
22. Open the appliance doors and attach all fittings
(see section headed Fittings).
Changing the door hinge of the freezer
compartment door
1. Hold on to the freezer compartment door and
unscrew the screw.
2. Pull off the hinge from the bottom pin of the freezer
compartment door.
3. Open the freezer compartment door and unhinge at
the top.
4. Pull out the guide sleeve.
en
21