Nederman RBU Serie Bedienungsanleitung Seite 24

EN RBU
Appendix B: Service protocol
Copy the service protocol, fill it in and save it as a service record.
NOTE!
significantly from previous results, investigate more carefully.
Unit No.
Description
General inspection
Connections
Corrosion/damage
Ventilation
Belt transmission
Belt tension
Belt replace
Pulley replace
Pump
Pump oil level and quality
Pump oil change
Internal cleaning
Pump service
Pump replace
Motor
Motor bearings grease
Motor bearings replace
Motor replace
Other
Inlet safety grating
Vacuum limiting valve disc
condition
Vacuum limiting valve function
Vacuum level
Thermal fuse replace
Discharge silencer
24
If the results of the checks (for example, measured values) differ
Reference
'9.1 General inspection'
'9.1 General inspection'
'7.1 Indoor installation'
'9.2 Belt transmission'
'9.2 Belt transmission'
'9.2 Belt transmission'
'9.3 Oil pump'
'9.4 Pump oil change'
'9.5 Internal cleaning'
'9.12 Pump service'
Contact local Nederman representative.
'9.9 Motor bearings'
'9.9 Motor bearings'
See motor manual.
'9.8 Inlet safety grating'
'9.10 Start-up and vacuum limiting valve'
'9.10 Start-up and vacuum limiting valve'
'9.11 Vacuum level'
'9.7 Thermal fuse'
'9.6 Discharge silencer'
Date:
Operating hours:
Performed by:
Result Notes