Ulthera Cellfina System System-Gebrauchsanweisung Seite 21

®
Ulthera, Inc. Cellfina System User Manual
Motor Module ON ONLY in treatment area
13) Release the suction using the footswitch.
14) Remove the Vacuum Handpiece. Continue to treat desired (marked) areas following the steps above.
15) Clean the treatment areas and apply pressure for a few minutes.
16) After the treatment, cover the treated areas with absorbent bandages per center practice. Compressive
garments can be used to provide additional security to the dressings.
1007270IFU Rev D 22 of 214