Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Ulthera, Inc.
1. Pull the release
button down and
remove the installed
cover/adaptor (if
needed)
2)
Depress the power button on the Motor Module and verify the Blue LED light turns on (solid) and the gear on
the underside rotates freely.
3)
Depress the power button to turn off the Motor Module and verify the LED light turns off and the gear stops.
4)
Remove the sterile cover, unwrap, and invert on the fingers (sterile gloved operator) of one hand. With the
inverted cover, grab the cleaned and disinfected Motor Module and attach to the sterile Micro-Blade
Assembly. Fold down cover over Motor Module to partially cover the Micro-Blade Assembly keeping it
above the bottom. Power on/off Motor Module to verify blade reciprocates. Return to sterile prep area.
1007270IFU Rev D
Cellfina
Tab
2. Select the
3. Identify the slot
appropriate
within the power
adaptor and
identify the tab
®
System
Slot
4. Orient the desired
adaptor at an angle
supply
and install the tab into
5. Press down to fully
seat the adaptor into
place noted by a
'click' sound
the slot
17 of 214
User Manual
Press Here
Werbung
Kapitel
