Application As Doorguard; Properties; Performance Features - Honeywell proX BUS-2 Montage- Und Bedienungsanleitung

38
4.

Application as Doorguard

4.1

Properties

The proX Keyswitch BUS-2 monitors the opening of emergency exit doors and can be installed on site.
In its functionality, the device corresponds to the Doorguard Plus BUS-2, though without an alarm signalling device.
Other external acoustical and optical alarm devices can be used if need be.
A corresponding intruder alarm control panel (561-MB24/48/100/MB-Secure) can be connected via BUS-2.
The door contacts (opening contacts) on the doors to be monitored serve as the alarm activation criterion. If the
emergency exit door is opened by someone unauthorized, a message is sent via BUS-2 to the intruder alarm control
panel. The alarm outputs are simultaneously actuated.
Indication of "Activation" and "Door open" state via red LED.
If need be, devices that are actuated when operating voltage is applied can be used as acoustical and optical alarm
devices (see following chapter).
If the emergency exit door requires opening for an authorized person, monitoring can be deactivated by release.
Deactivation options:
- Temporary release (programmable special functions)
- Permanent release (programmable special functions)
Possible operating procedures for temporary or permanent release:
- Directly on the device using a key or authorized ID pass card (IK2/proX1 and IK3/proX2)
- Using the detector input group DG4 (e.g. using an external key switch)
- Using an operating unit, which communicates with the control unit via BUS-2
- Remote release using IQ MultiAccess or IQ SystemControl
The green LED indicates the respective operating condition (see operating instructions for details).
As a visual indicator for the proX Keyswitch, every BUS-2 compatible group disable and display module (e.g. Item
no. 012542 or Item no. 012548) can be used as a remote indicating panel.
Remote release (activation/deactivation) is possible via the operating function "Disable detector groups" from every
operating unit of the intruder alarm control panel (e.g. Item no. 013002).
4.2

Performance features

Monitoring of opening of emergency exit doors
!
Indication of operating state via green LED
!
Indication of "Activation" and "Door open" state via red LED
!
Input for opening contact (door contact)
!
Input for opening contact (e.g. door monitoring via latch contact)
!
Input for tamper switch
!
Input with clearing function for self-storing detectors
!
Installation possibility of a half cylinder as per DIN 18252
!
Integrated reader for IK2/proX1 and IK3/proX2 ID data carriers
!
Operation via half cylinder and/or integrated reader
!
External operating input for remote operating module (key-operated switch or pushbutton)
!
External acoustical and optical alarm devices can be used
!
Activation of alarm devices with high current consumption via DUO Switching module
!
(Item no. f.m. version 010121.17, s.m. version 010131)
Operation at BUS-2 of the 561-MB24/48/100/MB-Secure intruder alarm control panel series
!
Programming as integrated bus user via the programming software of the control panel
!
Simple administration of data carriers and authorizations via control panel programming or
!
IQ MultiAccess / IQ SystemControl
Integration in the room/time zone concept of the intruder alarm control panel
!
Cover and tear-off monitoring
!
Operating units can be used via the BUS-2 of the intruder alarm control panel as operating and display
!
panels (e.g. Item no. 012542.17 or 013002) or purely as display panels (e.g. Item no. 012548.17) for
deactivating and activating.
Mounting directly on the wall or on a "DIN f.m. socket".
!
Mounting and Operating Instructions proX Keyswitch BUS-2