Recording The Output Of The Ur-80 On A Digital Device - Roland Edirol UR-80 Bedienungsanleitung

Recording the output of the UR-80 on a
digital device
fig.digital2.e
CD/MD/DAT player, etc.
Connect to either the OPTICAL or
COAXIAL OUT as appropriate for
your device
Connections
Use the appropriate type of cable to make connections to the digital output jack (OPTICAL/COAXIAL).
Sampling frequency select switch
Select the same sampling frequency for your audio data playback software, the UR-80, and your
digital audio recording device (e.g., MD or DAT).
Other notes
Don't connect anything to input jacks you are not using.
* The UR-80 does not support professional digital audio formats.
* The UR-80 is not able to output the input signal from its input jacks directly to its digital output jacks.
The digital output jacks always output only the audio signal that is being sent from your computer.
Set the sampling
* Match the sampling frequencies of your playback
software and your digital audio recording device
Recording audio
63