Cubase Sx; Settings In Cubase Sx - Roland Edirol UR-80 Bedienungsanleitung

Controlling your software

Cubase SX

Memory set
Use USR1.
Hold down the UR-80's MEMORY button and press the track status button USR1.
Software
You will need Cubase SX and EDIROL UR-80 for SX.xml.
EDIROL UR-80 for SX.xml is located in the SX folder inside the Cubase Remote folder of the
included CD-ROM.
Before you continue, copy EDIROL UR-80 for SX.xml onto your computer.

Settings in Cubase SX

1.
From the Devices menu, select Device Setup.
2.
Click the Add/Remove tab.
3.
In the Device Classes list, select Generic Remote and click [Add].
4.
In the device field, select Generic Remote, which you added in step 3, and click the Setup tab.
5.
Click [Import].
6.
Select EDIROL UR-80 for SX.xml (which you copied earlier), and click [Open].
7.
Specify the MIDI Input and MIDI Output.
MIDI Input
EDIROL UR-80 2
8.
In the Devices field of the Device Setup dialog box, select All MIDI Inputs.
9.
In the Device field of the Setup tab, click the EDIROL UR-80 2 Active field and set it to No.
* Unless you make this setting, the MIDI messages transmitted from the UR-80 will be thru-ed to the MIDI
tracks.
10.
Click [OK] to close the dialog box.
36
MIDI Output
EDIROL UR-80