Track Control Section - Roland Edirol UR-80 Bedienungsanleitung

Names of Things and What They Do

Track Control section

The Track Control section lets you control the track parameters of your sequencer software. In
addition to volume and pan, you can also control parameters such as track status and effect send
level. By switching track groups you can control the parameters of up to 32 tracks.
* The content that will actually be controlled will depend on the software you are using.
Synth Edit mode or V-LINK mode, the UR-80 will operate differently than explained here.
For details, refer to "Synth Edit mode
fig.track-knob
1.
Track Control knobs (TRACK/HQ CONTROL) .....................................................
You can assign MIDI messages to each of these eight knobs. Three different messages can be
assigned to each knob; one for each state of the Assign button (PAN, SEND 1, SEND 2). This means
that you can assign a total of 24 different messages to the Track Control knobs. Typically, you will
use these to control track panning or effect send on your sequencer software.
2.
Assign button (ASSIGN)
This button switches the messages that are assigned to the track control knobs. By pressing the
Assign button you can select from these choices: PAN → SEND 1 → SEND 2.
18
(p. 68)
" or "V-LINK mode
1
(p. 71)
".
2
Assignable