Werbung
fig.05-37e_30
9
In order to check that detection
has been completed, once again
go to "Apple System Profiler",
and select "Update all
information" from the Commands menu.
In the USB area, three audio devices will be displayed.
If these are displayed correctly, driver installation has succeeded. In the File
menu, click Quit to close "Apple System Profiler".
If they are not displayed correctly, disconnect the UA-700, wait for about ten
seconds, and then repeat the procedure from step 2.
Next, you will need to make the driver settings.
I Settings the sound input/output
fig.05-44e_30
1
From the Apple menu, select
Control Panel – Sound.
The Sound dialog box will
appear.
fig.05-45e_30
2
Click the Speakers tab or
Speaker Settings.
Getting Connected and Installing Drivers (Macintosh)
The main volume slider
will not move.
49
Werbung
Kapitel
