Werbung
fig.2-8_20
17
Make sure that the "Model" field
indicates "EDIROL UA-700
(WDM)", and click [Next]. Driver
installation will begin.
If the "What action do you want Windows to take?" setting was not set to
"Ignore", a "Hardware Installation" dialog box will appear.
If "What action do you want Windows to take?" is set to "Warn",
1. Click [Continue Anyway].
2. Continue the installation.
If "What action do you want Windows to take?" is set to "Block"
1. Click [OK].
2. When the "Found New
Hardware Wizard" appears,
click [Finish].
3. Perform the installation as
described in the
"Troubleshooting" section on
Device Manager shows "?",
"!", or "USB Composite
Device" (p. 242).
fig.2-9_30
18
The Insert Disk dialog box will
appear.
Click [OK].
Getting Connected and Installing Drivers (Windows)
In the case of the MME
driver, make sure that
"EDIROL UA-700
(MME)" is displayed.
The Insert Disk dialog
may not appear. In that
case, proceed to step 17.
19
Werbung
Kapitel
