Herunterladen Diese Seite drucken

Edirol COSM AUDIOCAPTURE UA-700 Bedienungsanleitung Seite 125

Werbung

E. Utility section
I Sample rate/Patch select
fig.04-11
2
ADVANCE (mode select) switch
The sample rate select switch is also used as the ADVANCE (mode select) switch that specifies
the operating mode when the UA-700 is connected to your computer.
ADVANCE ON (Advanced mode)
Set the switch to the ADVANCE 44.1, 48,
96 PLAY, or 96 REC position.
ADVANCE OFF (Standard driver mode)
Set the switch to the 44.1 or 48 position.
Advance mode is OFF
For details on the driver, refer to Getting Connected and Installing Drivers (Windows) (p. 14),
or Getting Connected and Installing Drivers (Macintosh) (p. 39).
2. Sequencer control switch
This switch controls the playback of your sequencer. If you press this switch when it is dark, the
switch will light and your sequencer will begin playing. If you press this switch when it is lit, it will
go dark and your sequencer will stop.
In order to enable this switch, you will need to make settings on your sequencer.
(➔ refer to Sequencer control switch settings (p. 143))
* The method of making these settings will depend on the version of your sequencer. Also, some sequencers may
not support remote control. For details, check the manual of your sequencer.
3. Patch Mode switch
The UA-700 lets you save the current state of the effect settings into one of six patches, and load
them at any time. This switch is used in conjunction with the Sequencer control switch and the
Sample rate select switch to save and load patches.
Sample rate select switch ......................................................... specifies the patch number
Sequencer control switch ......................................................... saves the patch
1. Sample rate select switch
This selects the sample rate (sampling frequency) that is used
when recording or playing audio signals. In order for this setting
to take effect, you must exit all applications, switch off the UA-700,
then turn it on again.
3
1
(➔ Using the sample rate select switch (p. 129))
Names of things and what they do
Advance mode is
ON
Advance mode is
OFF
125

Werbung

loading