Werbung
Advanced applications
3. With the indicators of the Compressor/De-esser switch and Guitar Effects switch both
blinking, turn the Guitar Effects section Effect control knobs 1–3 (p. 121) to adjust each
custom parameter.
Effect control knob 1
Effect control knob 2
Effect control knob 3
4. Press the Compressor/De-Esser switch once again to make it light.
The Guitar Effect Switch will stop blinking, and you will exit the custom parameter
adjustment mode.
*
The custom parameters you adjusted will return to the factory settings when the power is turned off.
*
You can make independent settings for each of the six different compressor types.
I Chorus/Reverb section
NProcedureN
fig.02-3
1. Press and hold the Chorus/Reverb switch for at
least three seconds.
The Chorus/Reverb switch and the Guitar
Effects switch will blink, and the UA-700 will
enter a mode that lets you adjust the Chorus/
Reverb custom parameters.
2. With the indicators of the Chorus/Reverb
switch and Guitar Effects switch both blinking,
turn the Guitar Effects section Effect control
knobs 1–3 (p. 121) to adjust each custom
parameter.
Effect control knob 1
Effect control knob 2
Effect control knob 3
3. Press the Chorus/Reverb switch once again to make it light.
The Guitar Effect Switch will stop blinking, and you will exit the Custom parameter
adjustment mode.
*
The custom parameters you adjusted will return to the factory settings when the power is turned off.
140
Level
Attack time
Release time
1
3
Chorus pre-delay
Chorus depth
Chorus rate
2
Werbung
Kapitel
