Werbung
Names of things and what they do
Equalizer/Tone controls
These adjust the tonal character.
3. Bass knob (BASS)
Adjusts mainly the lower range.
4. Middle knob (MIDDLE)
Adjusts mainly the midrange.
5. Treble knob (TREBLE)
Adjusts mainly the upper range.
I Chorus/Reverb section
Chorus
This effect adds a slightly modulated sound to the direct sound, creating beautiful spaciousness
and depth.
Reverb
This effect adds the reverberation that is characteristic of performing in a concert hall.
fig.04-9
1
2
3. Reverb Type select switch
Selects the type of reverb. A variety of acoustical spaces can be simulated, depending on the knob's
setting.
Plate (PLATE)
Large Hall (L. HALL)
Small Hall (S. HALL)
Room (ROOM)
Spring (SPRING)
4. Reverb Level knob
Adjusts the volume of the reverb sound.
124
4
3
Type
Simulates a plate reverb unit. (A reverb device that uses the vibrations of
a metal plate.) This is characterized by a metallic resonance with an ex-
tended high-frequency range.
Simulates the reverberation of a concert hall. This produces a mild and
spacious reverberation.
Simulates the reverberation of a small concert hall. This produces a soft
and clear reverberation.
Simulates the reverberation of a room. This produces bright-sounding
reverberation typical of a large room.
Simulates the spring reverb unit that is built into some guitar amps.
1. Chorus/Reverb switch
Switches chorus/reverb on/off. The effects are
bypassed when this switch is off.
2. Chorus level knob
Adjusts the volume of the effect sound.
Character
Werbung
Kapitel
