Werbung
Troubleshooting
For Windows 2000, click Advanced, and then click the Troubleshooting tab.
3. Set the Hardware acceleration slider to None, and click [OK].
4. In the Display Properties dialog box, click [OK] to close the dialog box. Then restart your
computer.
• In Windows XP, make the settings that enable background processing.
Make these settings so that audio processing can be performed smoothly.
Make settings as described in Make Windows XP settings to enable background processing. (p. 245).
• Try using the following procedure to change your disk drive settings.
The following setting item may not exist on some computers.
1. In the Windows Control Panel, double-click System.
2. Click the Device Manager tab.
3. Double-click Disk Drives to see the list of devices.
4. From the list, select GENERIC IDE DISK TYPE??, and click Properties to access the
GENERIC IDE DISK TYPE?? Properties dialog box.
* In the ?? field of GENERIC IDE DISK TYPE??, there will be a number that differs depending on
your computing environment.
5. Click the Settings tab, place a check mark in the check box for the DMA option, and click
[OK] to close the dialog box.
* Depending on your system, a DMA Settings dialog box may appear. Check the contents, and click
either [OK] or [Cancel].
6. In the System Properties dialog box, click [OK] to close the dialog box. Then restart your
computer.
• Try installing more memory.
Installing more memory will increase the performance of your computer. For details on how to install
more memory, refer to the operation manual for your computer.
• Does your computer satisfy the requirements of the USB standard?
If you are using a computer (such as a computer that you yourself assembled) that does not satisfy the
electrical requirements of the USB specifications, you may experience interruptions in the audio. If this
occurs, you may be able to solve the problem by connecting a USB hub that contains its own power supply.
• On some computers, audio playback may be interrupted due to the Power Management
settings in the Control Panel.
The Power Supply Properties that you see when you double-click Power Management will differ
depending on your computer system. One example is given below, but you should also refer to the
operation manual for your computer. Some computers may not have all of the following setting items.
1. Click the Windows Start button, and select Settings | Control Panel to open the Control Panel.
248
Werbung
Kapitel
