Werbung
Getting Connected and Installing Drivers (Windows)
This completes MIDI and audio input/output destination settings. If you
installed the standard Windows driver, make settings for the Windows
volume control.
Proceed to the next section. (➝ Volume Control setting (p. 36))
I Volume Control setting
If you installed the standard Windows driver, set the Windows volume
control.
1
Open the Volume Control.
Click the Windows Start button, and select Programs | Accessories |
Entertainment | Volume Control.
2
Raise or lower the slider to adjust the volume of the UA-700.
If you have installed the Standard driver, the UA-700 can use the Windows
volume control to adjust the output volume.
Items that can be set
CD Player
Controls the volume of "audio CDs" on the internal CD-ROM drive of
(CD Audio)
the computer. (*1)
Controls the volume of sound output from the "EDIROL UA-700"
WAVE
audio output device. Digital output and analog output will change.
Synthesizer
Controls the volume of the software synthesizer built into Windows.
SW Synth
* 1
If the CD playback volume does not change when you adjust this control, then change
the WAVE volume. If you are using Windows 2000 and the CD Player is not
displayed, check "Enable digital music CDs for this CD playback device" in
Digital CD Playback.
(➝ When playing audio CDs from the computer's internal CD-ROM
drive, or using the UA-700 to play game music (Standard driver mode
only) (p. 37))
36
If the Volume Control is
not installed on your
computer, use the Control
Panel icon Add or
Remove Programs to
install it. For details on
installation, refer to the
Windows manual or
Help.
You will be able to use the
UA-700 at the best audio
quality if you set the
Volume Control volume
to the maximum setting.
If Mute is checked or if
the slider is lowered all
the way, no sound will be
output from the UA-700.
Werbung
Kapitel
