Werbung
Getting Connected and Installing Drivers (Windows)
If you changed "File signature verification"
If you changed the "File signature verification" setting in step 5, restore the
original setting after Windows restarts.
1. After Windows restarts, log in to Windows as a user with administrative
privileges, (such as Administrator).
2. In the Windows desktop, right-click the My Computer icon, and from the menu
that appears, select Properties. The System Properties dialog box will appear.
3. Click the Hardware tab, and then click [Driver signature]. The Driver Signing
Options dialog box will appear.
4. Return the "File signature verification" setting to the original setting (either
"Warn" or "Block"), and click [OK].
5.
Click [OK]. The System Properties dialog box will close.
Next, you need to make the driver settings.
(➝ Settings and checking (p. 33))
I Windows Me/98 users
1
With the UA-700 disconnected, start up Windows.
Disconnect all USB cables other than those for a USB keyboard or USB mouse.
2
Exit all currently running software (applications).
Also, close any open windows. If you are using a virus checker or similar
software, be sure to exit this as well.
3
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
4
Click the Windows Start button. From the menu that appears, select Run....
Open the Run... dialog box.
26
If the UA-700 is already
connected to your
computer and a message of
"Add New Hardware
Wizard" is displayed, go to
the CD-ROM folder named
DRIVER\USB_ME98, open
the file Readme_e.htm, and
read the
"Troubleshooting"
section entitled "You
attempted to install using
the above procedure, but
were not able to".
Werbung
Kapitel
