Preparing To Use The Outdoor Sensor; Inserting The Batteries; Preparing The Temperature Station For Use - Auriol Z31743A Bedienungs- Und Sicherheitshinweise

Preparing to use
the outdoor sensor

Inserting the batteries:

Remove the battery compartment cover from
the back of the outdoor sensor.
Insert two 1.5 V
into the battery compartment
Note: Make sure you fit the batteries the
right way round (polarity). This is shown in the
battery compartment (see. fig E).
The outdoor sensor is now ready for use and
the control LED
Close the battery compartment cover.
If this does not work, carry out a restart, if
necessary. To do this, press and keep pressed
Z
the Z
Preparing the temperature
station for use
Inserting the batteries:
Open the battery compartment
of the temperature station.
Insert two 1.5 V
into the battery compartment.
Note: Make sure you fit the batteries the
right way round (polarity). This is shown on
the battery compartment (see. fig C).
Close the battery compartment cover.
Connecting the temperature station with
the outdoor sensor and the DCF radio signal:
After the batteries have been inserted, the temper-
ature station attempts to establish a connection
82 GB/MT
28
/ REGISTER button
batteries (AA) (included)
30
illuminates briefly.
.
18
batteries (AA) (included)
.
on the back
24