Adapter; Cleaning & Care Instructions; Disposal - Crivit IAN 284744 Bedienungsanleitung

By treading steadily on the red pedal surface, the connected object
will be inflated (B3).
- Make sure that the pump tube is not bent.
- When pumping watch the display of the pressure gauge.
- Please note that some types of valves do not show the air pressure.
This applies in particular to old dunlop valves.
- The pressure gauge display value may slightly differ from the actual
pressure.

Adapter

: (C1)
(1) E.g. balls
(2) E.g. air mattresses
(3) E.g. inflatable boats
(4) To inflate inner tubes with schrader valves e.g. mountain bikes,
trolleys and trailers.
(5) To inflate inner tubes with blitz valves, e.g. city/trekking bicycles
(6) For inflating inner tubes with a presta valve, e.g. on racing bicy-
cles and mountain bikes.
(7) Dual head (To lock in place, please fold down the lever of the
dual head.)
(Valves not included)
Inflating tyres with a schrader valve: (C2)
First remove the dust protection cap (1). Insert the dual head with the
large opening into the valve (2). To lock in place, please fold down
the lever at the pump head (3).
Inflating tyres with a blitz valve: (C3)
First remove the dust protection cap (1). Insert the dual head with the
small opening into the valve (2). To lock in place, please fold down
the lever at the pump head (3).
Inflating tyres with a presta valve: (C4)
First remove the dust protection cap (1). Detach the valve nut (2a-2c).
Insert the dual head with the small opening into the valve (3). To lock
8
in place, please fold down the lever at the pump head (4).
Inflating air mattresses, inflatable toys, etc.: (C5)
First open the valve plug (1). Select the appropriate plastic adapter
and insert it into the large opening of the dual head (2). To lock in
place, please fold down the lever of the dual head (3). Now insert
the plastic adapter into the object to be inflated (4).
Inflating balls: (C6)
Insert the metal adapter in the large opening of the dual head (1). To
lock in place, please fold down the lever at the pump head (2). Now
insert the adapter into the ball (3).
Assembly options of the bag on the bicycle: (D)
To transport the pump on the bicycle, you can attach the bag to the
bicycle using the three velcro fasteners as shown in the figure (D).
!
Cleaning & care instructions:
- clean with a damp cloth
- do not immerse in water
- regularly inspect the pump's screw joints for secure attachment
before use
- lubricate the pump seal with acid-free grease at least once a year
To do this, unscrew the nut on the pump cylinder, after which you
can remove the pump plunger with the spring and grease the seal
ring. Assembly is carried out in reverse order. (E1/E2)
- Store Mini Foot Air Pump in a cool, dry place protected from UV light.

Disposal:

Packaging is made of 100% environmentally-friendly
materials that can be disposed of at your local recycling
point.
Please enquire with your community or municipal administration
regarding possibilities for the disposal of the product.
9