1 Instruction Manual; Intended Use; Package Contents; Technical Data - Crivit IAN 284744 Bedienungsanleitung

!

Intended use:

This mini foot air pump is suitable for inflating all common bicycle
tyres, air mattresses and balls. Other applications or changes made to
the product are considered as non-intended usage and may lead to
hazards, such as injuries and damage. The distributor bears no liabil-
ity for damages resulting from non-intended usage. The product is not
intended for commercial use.

Package contents:

(A)
1 mini foot air pump
1 metal adapter for balls
2 plastic adapter for air mattresses, inflatable toys, etc.
(Adaptors store inside the pump barrel (A1))
1 storage and transport bag
1 instruction manual

Technical data:

Type: mini foot air pump
Articel-Nr.: 26310 / IAN 284744
Monz-Nr.: PO30000211
Nominal pressure: 4 bar / 58 psi
Maximum allowable pressure: 7 bar / 100 PSI
Displacement: 110 ml / 110 cm³
Pressure hose length: 48 cm
Production date: 2016
Warranty: 3 years
!

Safety instructions!

ATTENTION! RISK OF DEATH AND INJURY.
Keep packaging material away from children. There is a risk of
suffocation and other injuries!
- You can inflate all bicycle tyres up to the pump's indicated maximum
tyre pressure (max. 7 bar / 100 psi) or to the tyre manufacturer's
6
indicated maximum tyre pressure. This can usually be found on the
tyre wall. The indicated maximum values may not be exceeded at
any time.
Warning! Risk of injury through explosion if maximum permit-
ted pressure values are exceeded.
- Defective or damaged air pumps may no longer be used due to risk
of injury. Defective mini foot air pumps must be properly disposed of.
Repairs are not possible.
Warning! Damaged pump, hose, adapter or faulty connectors
cause risk of explosion.
- Due to the high operating force and the risks associated with this,
the product is not suited for use by children or persons with physical
and/or mental impairments.
Warning! Please note that the pump plunger and pump cylin-
der become very hot over longer periods of pumping due to the
friction between them. For this reason, after pumping you should only
hold the pump by the pedal surface in order to avoid burns.
- Due to the risk of injury, a defective or damaged mini foot air pump
may never be used. Defective pumps must be properly disposed of
since repairs are not possible.
Warning! Some bicycle valves do not allow pressure display.
For your own safety, please check the air pressure with a
calibrated manometer (i.e. at a fuel station).

Initial use of the pump:

Please ensure that the pump plunger is spring loaded and quickly
rebounds when opening it. Release the pump plunger by placing the
pump on the ground. Next, press the pump plunger downwards with
your hand, while at the same time folding out the bracket with your
other hand, so that this can be used as pump pedal.
To lock the pump, proceed in reverse order.
- While pumping, make sure to always place one foot on the retain-
ing bracket of the pump to prevent it from tilting (B2).
- Place one foot on the folded down retaining bracket of the pump.
(B1)
7