VOLTCRAFT B6 Dual Power Bedienungsanleitung Seite 85

With the buttons "INC" or "DEC", you can select between "ON" (= safety cutoff activated) and
"OFF" (safety cutoff deactivated).
Save the setting by pressing the "Start/Enter" button.
Now the capacity starts to blink in the bottom line on the right.
With the buttons "INC" or "DEC", you can select the capacity (10 to 50000mAh). For a quick
adjustment, hold the corresponding button for a longer period of time.
Save the setting by pressing the "Start/Enter" button.
• With the "INC" button, you access the next setting (or with the button "DEC" the previous
setting). Return to the main menu with the button "Batt Type/Stop".
Key Beep Key Beep Key Beep
Key Beep Key Beep
Buzzer Buzzer
Buzzer Buzzer Buzzer
With the option "Button Beep", you activate/deactivate the confirmation beep at every push
of a button.
The option "Buzzer" switches the signal of functions/warning messages on or off.
Briefly press the button "Start/Enter". "ON" (or "OFF") starts to blink in the top display line.
With the buttons "INC" or "DEC", you can select between "ON" and "OFF".
Briefly press the button "Start/Enter" for saving. "ON" (or "OFF") starts to blink in the bottom
display line.
With the buttons "INC" or "DEC", you can select between "ON" and "OFF".
Save the setting by pressing the "Start/Enter" button.
• With the "INC" button, you access the next setting (or with the button "DEC" the previous
setting). Return to the main menu with the button "Batt Type/Stop".
Input Power Low Input Power Low
Input Power Low Input Power Low Input Power Low
Cut-Off Cut-Off Cut-Off
Cut-Off Cut-Off
This function monitors the voltage at the charger input (e.g. for a 12V accumulator). If the
voltage drops below the configured value, the charging process is stopped.
Briefly press the button "Start/Enter". The voltage value then begins to flash.
With the buttons "INC" or "DEC", you can select the voltage value (10 to 11V).
OFF OFF OFF
OFF OFF
OFF OFF
OFF OFF OFF
10.0V 10.0V 10.0V
10.0V 10.0V
85