VOLTCRAFT B6 Dual Power Bedienungsanleitung Seite 83

The setting "USB Enable" is without function and may not be used (in other versions of the
charger, this serves to switch the connection socket for the temperature sensor to a USB/
RS232 port).
Briefly press the button "Start/Enter". The bottom display begins to flash.
USB/Temp Select USB/Temp Select
USB/Temp Select USB/Temp Select USB/Temp Select
Temp Cut-Off 80C Temp Cut-Off 80C Temp Cut-Off 80C
Temp Cut-Off 80C Temp Cut-Off 80C
With the buttons "INC" or "DEC", you switch between the display "Temp Cut-Off" and "USB".
(As described above, this is without function in this version of the charger. Do not use it!).
Confirm the selection by pressing the "Start/Enter" button.
If "Temp Cut-Off" was selected, the small 3-pole connector serves as input for a temperature
sensor (not part of the delivery, must be ordered separately).
The temperature blinks (see ill. on the top left, "80C"). With the buttons "INC" or "DEC", you
can set the temperature at which a subsequent charge or discharge process is terminated.
Save the setting by briefly pressing "Start/Enter".
• With the "INC" button, you access the next setting (or with the button "DEC" the previous
setting). Return to the main menu with the button "Batt Type/Stop".
Waste Time Waste Time Waste Time
Waste Time Waste Time
CHG>DCHG CHG>DCHG
CHG>DCHG
CHG>DCHG CHG>DCHG
The accumulator may become quite hot using the cycle program (automatic charge/
discharge cycles in sequence). Set a break time here to allow the accumulator to cool off
sufficiently.
Briefly press the button "Start/Enter". The time then begins to flash.
With the buttons "INC" or "DEC", you can select the time (1 to 60 min).
Save the setting with the button "Start/Enter"; the time stops blinking.
• With the "INC" button, you access the next setting (or with the button "DEC" the previous
setting). Return to the main menu with the button "Batt Type/Stop".
Safety Timer Safety Timer Safety Timer
Safety Timer Safety Timer
ON ON
ON ON ON
1min 1min
1min
1min 1min
120min 120min
120min 120min 120min
USB/Temp Select USB/Temp Select
USB/Temp Select USB/Temp Select USB/Temp Select
USB USB USB
USB USB
Enable Enable Enable
Enable Enable
83