Intended Use - Ottobock 17LA3N Gebrauchsanweisung

Item Component
6 Base body
7 Axial washers
9 Countersunk head screws
10 Ball
11 Spring guide housing
12 Compression spring
Not included in scope of delivery
Item Component
not illus­ Lamination bar
trated
or side bar
Foot stirrup
or foot stirrup
Lamination dummy set
see fig. 2
Lamination dummy – lower part (item
1)
Shoulder screw (item 3)
The cover for the lamination dummy
(item 2) is not included in the set.

3 Intended use

3.1 Indications for use
System ankle joints are intended to be used exclusively for providing a
patient with a lower limb orthosis.
In case of unilateral use, the manufacturer recommends that the system
ankle joint be processed by means of the lamination resin technique or car­
bon prepreg technology.
3.2 Indications
Partial or total paralysis of the leg muscles.
Indications must be determined by the physician.
14
Reference number
17LA32N=16 (size 16)
17LA32N=20 (size 20)
Axial washers set
17LA33N=10 (size 10)
17LA33N=12 (size 12)
17LA33N=14 (size 14)
17LA33N=16 (size 16)
17LA33N=20 (size 20)
501S137=M4x8 (size 10, 12)
501S137=M4x10-2 (size 14)
501S137=M5x10-1 (size 16, 20)
Compression spring set
17LA34N=12 (size 10, 12)
17LA34N=14 (size 14)
17LA34N=16 (size 16)
17LA34N=20 (size 20)
Reference number
17LS3=*
17LV3=*
17LF3N=*
17LF31N=*
17LD1N=*