cecotec CONGA 1290 Serie Bedienungsanleitung Seite 26

ENGLISH
WATER INTENSITY/TIME SETTINGS
1. Water intensity
• Short press
between 1: high, 2: medium, or 3: low. The display will show 1, 2 or 3 and the robot
will emit the number of beeps respectively.
2. Timer settings
• Long press the
buttons to select the desired hour and minutes, and then short press
the settings.
POWER
• Long press the POWER button for 3 seconds to select the suction power level.
Choose between 1: high, 2: medium or 3: low. The display will show 1, 2 or 3 and the
robot will emit the number of beeps respectively.
DIRECTION BUTTONS
During standby mode or automatic cleaning:
• Press to move the robot forward.
• Press to move the robot backward.
• Press for the robot to turn left.
• Press for the robot to turn right.
TIME AND SCHEDULE SETTINGS
The robot's scheduling must be carried out from the remote control by means of the schedule
button .
1. Schedule
Make sure the robot is switched on and in standby mode.
Entering the schedule mode
• Long press
mode. The display will show the current day and time, the week day will flash and the
time icon will light up. If the current day has been already scheduled, the schedule
button will be lit up.
Setting day
• Use the direction buttons
selected day of the week will flash.
• Press to confirm the day of the week and the selected day will turn steady.
26
to adjust the water intensity during scrubbing mode. Select
button to enter the time-settings mode. Use the direction
on the remote control for 3 seconds in order to enter the schedule
and to select the day from Monday to Sunday, the
to save