Beko GNE134621X Bedienungsanleitung Seite 25

Press the relevant button again to
deactivate this function.
9. Quick Freeze Function Indicator
It indicates that the Fast Freeze
function is active. Use this function
when you place fresh food into the
freezer compartment or when you
need ice. When this function is active,
your refrigerator will run for a certain
period of time.
Press the relevant button again to
deactivate this function.
10. Freezer Compartment
Temperature Indicator
It indicates the temperature set for
Freezer Compartment.
11. Fridge Compartment
Temperature Indicator
Indicates the temperature set for
Fridge Compartment.
12. Quick Cool Function Indicator
Indicates that the Quick Cool function
is active. Use this function when
you place fresh food into the fridge
compartment or when you need to
cool your food quickly. When this
function is active, your refrigerator will
run for 2 hours without stopping.
Press the relevant button again to
deactivate this function.
13. Multi Zone Compartment
Temperature Indicator
It indicates the temperature set for
Multi Zone compartment.
14. Economy Mode Indicator
Indicates that the refrigerator is running
in energy-efficient mode. Freezer
Compartment temperature
This indicator will be active if the
function is set to -18 or the energy
efficient cooling is being performed
due to Eco-Extra function.
15. Error Status Indicator
If your refrigerator does not cool
adequately or if there is a sensor
failure, this indicator will be activated.
When this indicator is active,
Freezer Compartment Temperature
indicator will display "E" and Fridge
Compartment Temperature Indicator
will display numbers such as "1,2,3...".
These numbers on the indicator
provides information about the error to
the service personnel.
16. Key Lock Indicator
Use this function if you do not
want your refrigerator temperature
setting changed. Press Quick Cool
Button and Flexi Zone Compartment
Temperature Setting Button
simultaneously for a long time (3 sec)
to activate this feature.
Press the relevant buttons again to
deactivate this function.
17. Ice Cancel Button
To stop ice formation, ice cancel
button is pressed for 3 seconds. When
ice cancel is selected, no water will
be sent to the ice box. Despite this,
some ice may be leftover in the ice
box which may be taken from there. To
restart ice formation, ice cancel button
has to be pressed for 3 seconds.
24
EN