Setting Up Barometric Pressure And Weather Trend - Auriol z31163 Bedienungs- Und Sicherheitshinweise

Press any button except for the SNOOZE- / LIGHT button to stop the
alarm signal until the next day. It is not necessary to reactivate the alarm.
It switches itself automatically to the alarm time which has already
been set.
Setting up barometric pressure
and weather trend
The display indicates the absolute current barometric pressure
barometric pressure trend
Note: After preparing for use, the geographic altitude must be communi-
cated to the device, to enable an approximate weather trend based on the
barometric pressure.
For this, it is imperative that you set the current weather. To do so,
proceed as follows:
1. Press and hold the WEATHER / UNIT button
and the current weather display blinks. Press the ▲ °C / °F
ALARM ON / OFF buttons
2. Then confirm your selection of the current weather display by pressing
the WEATHER / UNIT button.
by means of an arrow:
4
to set the current weather.
16
and the
3
until a signal sounds
19
and ▼
17
GB/CY 15