Before Use; Setting Up The Product - Auriol HG05056-MSF Bedienungs- Und Sicherheitshinweise

Before use

Note: Remove all packing materials before use.
Note: Remove protection foil on light field
anti-slip surface on the bottom before use.
Note: Unplugged from the mains the light alarm clock only has
two emergency functions (clock and electronic alarm signal). An
electric connection is therefore required prior to use.
First remove the protective film from the LC-display
light alarm clock.
A plastic strip protrudes from the battery compartment cover
on the rear side of the light alarm clock. Remove this plastic
14
strip to utilise the inserted battery.
Plug the DC plug
input socket
adaptor
38

Setting up the product

CAUTION! When choosing a position for the product, make
sure that it is not exposed to direct sunlight, vibrations, heat,
cold damp or dust. Do not install the product close to heat
sources, e.g. radiators. There is otherwise a danger that the
product will be damaged.
Place the product on a flat, level surface.
14 GB/IE/NI
of the power adaptor
37
of the light alarm clock. Then plug the power
12
into an easy to access socket.
, LC-display
1 3
of the
3
into the DC
38
and