Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONTENTS
1.
INTRODUCTION
2.
3.
4.
5.
6.
7.
8.
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9.
10
1.
INTRODUCTION
This documentation supplies the general indications for the storage, installation and use of series ED electric panels.
The appliances have been designed and made for the control and protection of Submersible electropumps and
circulators.
The panel is self-protected and protects the electropump against overloads, short circuits, lack of phase and excess
temperature, with manual reset.
As well as protecting the connected pump, the operating logic of series ED electric panels makes it automatic with the
aid of one or two floats (A and B).
The function of the float (A) alone is to activate and disable the pump, in both emptying and filling.
In connection with the float (B), protection against dry running is activated.
2.
STORAGE
A long period of inactivity in precarious storage conditions may cause damage to the equipment and thus cause risk to
the personnel in charge of installation, control and maintenance. First of all it is good practice to ensure that the unit is
correctly stored, scrupulously observing the following indications:
the panel must be kept in a completely dry place, far from sources of heat;
the electric panel must be perfectly closed and insulated from the outside environment, so as to prevent insects,
damp and dust from getting in and damaging the electric components, to the detriment of their regular operation.
3.
TRANSPORT
Avoid subjecting the products to needless jolts or collisions.
ENGLISH
15
page
15
15
15
16
16
16
16
16
16
17
18
19
19
19
19
20
20
20
21
58
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
