Yamaha DM2000 Bedienungsanleitung Seite 401

13.4.32 Parameter request
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When the data is received, the Automix Status data is transmitted on the
[Rx CH] every second for 10 seconds.
When the second byte of Address is received on 0x7F, data transmission
will be halted immediately (disable).
Transmission
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0011nnnn 3n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
DM2000
MODEL ID 00000110 06
Automix status
ADDRESS 00100011 23
0:Transmission request,
0ddddddd dd
0x7F:Transmission stop request
End of exclusive
EOX 11110111 F7
(Automix status)
Format Details
DM2000 Version 2—Bedienungsanleitung
401