Yamaha DM2000 Bedienungsanleitung Seite 397

0eeeeeee ee
0ppppppp pp
0ccccccc cc
DATA 0ddddddd dd
:
:
EOX 11110111 F7
13.4.13 Parameter request
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the value of the specified parameter will be transmit-
ted as a Parameter change.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0011nnnn 3n
GROUP ID 00111110 3E
MODEL ID 00000110 06
ADDRESS 00000100 04
0eeeeeee ee
0ppppppp pp
0ccccccc cc
EOX 11110111 F7
13.4.14 Parameter change
(Function call Library: store / recall)
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the specified memory/library will be stored/recalled.
Transmission
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0001nnnn 1n
GROUP ID 00111110 3E
MODEL ID 01111111 7F
ADDRESS 00010000 10
00ffffff ff
0mmmmmmm mh
0mmmmmmm ml
DATA 0ccccccc ch
0ccccccc cl
EOX 11110111 F7
function
SCENE RECALL 0x00
EQ LIB RECALL 0x01
GATE LIB RECALL 0x02
COMP LIB RECALL 0x03
EFF LIB RECALL 0x04
GEQ LIB RECALL 0x05
CHANNEL LIB RECALL 0x06
INPATCH LIB RECALL 0x07
OUTPATCH LIB RECALL 0x08
Bus to Stereo LIB RECALL 0x09
Surround Monitor LIB RECALL 0x0A 0-32, 8192
AUTOMIX LIB RECALL 0x0B
SCENE STORE 0x20
EQ LIB STORE 0x21
GATE LIB STORE 0x22
COMP LIB STORE 0x23
EFF LIB STORE 0x24
GEQ LIB STORE 0x25
CHANNEL LIB STORE 0x26
Element no. (If 'ee' is 0, 'ee' is expanded
to two bytes)
Parameter no.
Channel no.
data
End of exclusive
(Backup memory)
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
DM2000
Backup data
Element no. (If 'ee' is 0, 'ee' is expanded
to two bytes)
Parameter no.
Channel no.
End of exclusive
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
Universal
Function call
function
number High
number Low
channel High
channel Low
End of exclusive
number channel*1) rx/tx
0-99, 8192 256 rx/tx*2)
1-200, 8192 0-513 rx/tx
1-128, 8192 0-95 rx/tx
1-128, 8192 0-513 rx/tx
1-128, 8192 0-7 rx/tx
0-128, 8192 0-5 rx/tx
0-128, 8192 0-513 rx/tx
0-32, 8192 256 rx/tx
0-32, 8192 256 rx/tx
0-32, 8192 256 rx/tx
256 rx/tx
1-16 256 rx/tx
1-99 256, 16383 rx/tx
41-200 0-513, 16383 rx/tx
5-128 0-95, 16383
37-128 0-513, 16383 rx/tx
62-128 0-7, 16383 rx/tx
1-128 0-5, 16383 rx/tx
2-128 0-513, 16383 rx/tx
function
INPATCH LIB STORE 0x27
OUTPATCH LIB STORE 0x28
Bus to Stereo LIB STORE 0x29
Surround Monitor LIB STORE 0x2A 1-32
AUTOMIX LIB STORE 0x2B
*1) 0:CH1 - 95:CH96, 128:BUS1 - 135:BUS8, 256:AUX1 -
267:AUX12, 384:MATRIX1L - 391:MATRIX4R, 512:STEREO L -
513:STEREO R
Use 256 if the recall destination or store source is a single data
item.
Effect is 0:Effect1 - 7:Effect8, GEQ is 0:GEQ1 - 5:GEQ6
If the store destination is 16383 (0x3FFF), this indicates that the
library data has been changed by a external cause (such as bulk
reception) (only transmitted by the DM2000)
*2) This is also transmitted when a program that is not assigned in
the [Program Change Table] is recalled. (Normally, it is trans-
mitted by Program Change messages.)
13.4.15 Parameter change
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the title of the specified memory/library will be
changed.
Transmission
In response to a request, a Parameter Change message will be transmitted
on the [Rx CH].
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0001nnnn 1n
GROUP ID 00111110 3E
MODEL ID 01111111 7F
ADDRESS 00010000 10
0100ffff 4f
0mmmmmmm mh
0mmmmmmm ml
DATA 0ddddddd dd
:
:
:
0ddddddd dd
EOX 11110111 F7
function
SCENE LIB TITLE 0x40
EQ LIB TITLE 0x41
GATE LIB TITLE 0x42
COMP LIB TITLE 0x43
EFF LIB TITLE 0x44
GEQ LIB TITLE 0x45
CHANNEL LIB TITLE 0x46
INPATCH LIB TITLE 0x47
OUTPATCH LIB TITLE 0x48
Bus to Stereo LIB TITLE 0x49
Surround Monitor LIB TITLE 0x4A 0-32 (0:response only)
AUTOMIX LIB TITLE 0x4B
13.4.16 Parameter request
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, a Parameter Change message will be transmitted on
the [Rx CH].
Refer to the above table for the Functions and Numbers.
STATUS 11110000 F0
ID No. 01000011 43
SUB STATUS 0011nnnn 3n
GROUP ID 00111110 3E
DM2000 Version 2—Bedienungsanleitung
397
Format Details
number channel*1) rx/tx
1-32 256, 16383 rx/tx
1-32 256, 16383 rx/tx
1-32 256, 16383 rx/tx
256, 16383 rx/tx
1-16 256, 16383 rx/tx
(Function call: title)
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
Universal
Function call
title
number High
number Low
title 1
title x (depend on the library)
End of exclusive
number size
0-99,256 (0:response only) 16
1-200 (1-40:response only) 16
1-128 (1-4:response only) 16
1-128 (1-36:response only) 16
1-128 (1-52:response only) 16
0-128 (0:response only) 16
0-128 (0-1:response only) 16
0-32 (0:response only) 16
0-32 (0:response only) 16
0-32 (0:response only) 16
16
1-16 16
(Function call: title)
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)