Loading The Paper Roll And Ink Ribbon - Sony SnapLab UP-CR25L Bedienungsanleitung

Loading the Paper Roll and Ink
Ribbon
When you use the unit for the first time, load the paper roll
and ink ribbon.
To load the paper roll
Note
Be careful that your fingers and clothing are not caught in
the paper door or on the protuberance in the opening of the
door.
1
Press and lower the paper door lever, hold the paper
door at the center portion, and pull the door forward
until it locks into the open position.
26

Loading the Paper Roll and Ink Ribbon

2
Remove the paper core.
3
Insert the paper core into the paper roll.
The two sides of the paper core are the same shape.
You can insert either side.