Switching Yuv/Rgb - Yamaha DVD-S661 Bedienungsanleitung

5 Press 2 / 3 to adjust the setting that best
suits your personal preference.
6
Repeat steps 4-5 to adjust other color
features.
7
Press ENTER.
Note
All picture settings are not available for HDMI
output.

Switching YUV/RGB

This setting allows you to toggle the output of
the video signal between YUV (Y P
RGB (on SCART).
1
In "VIDEO SETUP PAGE", press 5/a to
highlight [COMPONENT], and then press
3.
YUV
Select this for the component video
connection.
RGB
Select this for SCART connection.
2
Press 5/a to select a setting, and then
press ENTER.
Note
When making HDMI connections, the component
(YUV) video signals are output even if [RGB] is
selected.
Setting the HDMI video
When you connect this unit to an HDMI
compatible component via the HDMI jack,
select the following video output settings
depending on the connected component.
1
In "VIDEO SETUP PAGE", press 5/a
to highlight [HDMI SETUP], and then
press 3.
2
Press 5/a to highlight an option.
3 Press 3 to enter a submenu.
WIDE SCREEN FORMAT
Set the aspect ratio of the projected images on
P ) and
B R
the screen. This feature is only available when
making HDMI connections and [TV
DISPLAY] is set to [16:9] (see page 27).
SUPERWIDE
Select to display a 4:3 image on the 16:9 screen
with non-linear stretching (center position of
screen is stretched less than the sides). This
feature is not available when the resolution is
480p or 576p.
4:3 PILLAR BOX
Select to display a 4:3 image on the 16:9 screen
without stretching.
OFF
No aspect ratio adjustment is made when this
option is selected.
HDMI VIDEO
Set the resolution depending on the monitor
you are using.
480P
480 progressive-scan video
576P
576 progressive-scan video
720P
720 progressive-scan video
1080I
1080 interlace video
AUTO
The resolution is automatically selected to
match the monitor you are using.
Setup Menu
29
En