Tracer RVIEW S1 Betriebsanleitung Seite 9

Instructions for use
CONNECTING THE SCREEN
1. Place the screen in the desired location on the dashboard.
2. Connect the red wire from the 2.4 GHz RECEIVER and the red wire of the SCREEN POWER
SUPPLY CABLE to the selected power source (car electrical system, radio, car cigarette lighter). You
can use the supplied (QUICK) CONNECTOR for that purpose.
3. Connect the black wire from the 2.4 GHz RECEIVER and the black wire of the SCREEN POWER
SUPPLY CABLE to the ground (car electrical system, radio, car cigarette lighter).
4. Connect the red wire of the SCREEN CABLE to the black plug of the SCREEN POWER SUPPLY
CABLE.
6. Connect the yellow plug of the SCREEN CABLE to the yellow plug of the 2.4 GHz RECEIVER.
OPERATING THE REARVIEW CAMERA
If you have performed all the steps correctly, when you put the car in reverse, the power supply from the
taillight should activate the rearview camera. As soon as the VIDEO signal is received via the wireless
set, the screen should activate as well; as a result, the screen should display the camera image.
Receiver
Receiver
12V
odbiornik
Tracer RVIEW S1
Wireless
12V
GROUND
12V
EN
9