Product Maintenance; Cleaning Operations - Foppapedretti B9/0407113 Montageanweisungen

GB
USE
Press until a click is heard indicating that the adapter has been secured correctly.
WARNING: Before use, always make sure that both the adapters have been secured correctly to the
chassis. When lifted they must not detach from the chassis.
REMOVING THE ADAPTERS(fig.38): press button "A" to remove the adapter.
USING THE INFANT CAR SEAT AND CARRYCOT TRAVEL SYSTEM ACCESSORIES
IMPORTANT: the travel system accessories must be secured to the chassis only in the parent-
facing position (fig.39 - fig.40).
Fitting the accessory(fig.41a/b/c): Line up the locking mechanism fitted on the accessory with the
adapters and press downwards until a click is heard indicating that the accessory has been fastened
correctly to the pushchair chassis complete with adapters. Make sure that the accessory has been
fastened correctly on both sides.
WARNING: Before use, always make sure that the accessory has been secured correctly. When the
accessory is lifted upwards it must not detach from the pushchair chassis.
Removing the accessory(fig.42 - fig.43): pull levers "A" on both sides and remove the accessory by
lifting it using the handle. As an alternative, the accessory can be removed by pressing button "B"
on both sides. In this case the accessory is removed with the adapters fastened to it.

PRODUCT MAINTENANCE

This pushchair requires a minimum amount of regular maintenance.
The lifetime of the pushchair will be increased if the moving parts are lubricated and it will also
make the opening and folding operations easier.
If any of the parts of the pushchair should become stiff or difficult to operate, apply a small
quantity of spray lubricant, for example WD 40. Do not use oil or grease. The WD 40 should not
be used to lubricate the removable wheels. If necessary, the wheels must be removed and cleaned
with a soft, dry cloth.
Check the locking mechanisms, the brakes, the wheels, the harnesses, the levers, the seat
regulators, the joints and the securing devices regularly to make sure that they are fastened
correctly and in good operating order.
The wheels are subject to wear and should be replaced if necessary.
Carry out a careful inspection to check the pushchair is in good operating condition after 18 months
of use, after a long period of storage and before using it for another baby.

CLEANING OPERATIONS

Clean the fabric with water, neutral detergent and a sponge.
Clean the fabric using warm water, a sponge and a neutral detergent.
The plastic and metal parts can be cleaned with warm water, a sponge and a neutral detergent.
Never use abrasive products for cleaning or ammonia based products, bleach or turpentine.
Brush the fabric rather than wash it.
TUO 0