Car Seat Maintenance And Care - Foppapedretti iWood Type BS06N Montageanweisungen

• ENGLISH •
MAINTENANCE
6. Information for car seat care
To ensure effective protection of the car seat
In the event of an accident with an impact speed of over 10 km/h, the car
•
seat may be damaged in a way that is not necessarily visible, in which case it
is extremely important to replace it.
Check the car seat regularly to ensure that there are NO damaged parts.
•
Check that all the mechanical components are working correctly.
•
To prevent the car seat from being damaged or broken, make sure that it
•
does not get stuck between the doors or seat rails, etc.
If the car seat is damaged (for example as a result of being dropped), have
•
it checked by the manufacturer.
6.1 Maintenance of the harness buckle
The buckle needs to function correctly to ensure the safety of your child in the
car seat. If the buckle fails to work, this is most likely due to an accumulation
of dirt and dust.
Possible faults
The tabs on the buckle come out slowly after pressing the red release button.
The tabs do not attach together properly (they are released).
The tabs attach together without emitting the "click" sound.
The tabs do not fit together easily (you feel some resistance).
The buckle only opens with strong pressure.
Solution
Wash the buckle so that it starts to work properly again:
1. How to remove the harness buckle
Unclip the buckle (press the red release button).
Loosen the belts on the harness.
Locate the metal ring attached to the belt under the child restraint. Rotate
the metal ring and remove it through the shell and the padding.
46