Herunterladen Inhalt Inhalt Diese Seite drucken

Foppapedretti B9/0407113 Montageanweisungen Seite 114

Base für autositz gruppe 0+ (type b9/0407113)
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 70
GB
Your Group 0+ (2)
1. Shell
. Cover
. Shoulder strap
. Ergonomic handle
. Sun canopy
. Support pillow
. Belt pad
. Lap belt guide (x)
. Harness buckle
10. Harness release button
11. Crotch strap
1. Adjustment strap
1. Diagonal belt guide
In-car installation
WARNING ! Do not install your Group 0+ seat on the front seat of a vehicle fitted with an
AIRBAG. Always position your Group 0+ seat facing rearwards.
Place the child seat on the front or back seat of your vehicle, always facing rearwards,
with the handle in the vertical position ().
Buckle the belt ().
Pull out the seat belt and pass the lap section through the side guides () (). Pull and
pass the diagonal section of the belt behind the car seat, and slide it into the guide at
the back of the shell () (). Ensure that the belt is not twisted and stretch it as tightly
as possible ().
Adjustment of the safety harness
The car seat harness must be adjusted to the size of your child. The shoulder harnesses
can be adjusted to three heights, and they must be passed through the slots closest to your
child's shoulders.
Pull the shoulder belts through the slots in the shell and cover (10) (11) (1).
Place the shoulder belts back, at the required height and use the same slots in both the
shell and the cover .
• Loosen the harness: Press on the adjuster positioned between the legs at the front of
the car seat, and pull on the two shoulder harnesses simultaneously (1).
• Tighten the harness: Pull on the adjustment strap at the front of the car seat; it is not
necessary to press on the adjuster (1).
A properly adjusted harness actively contributes
to the best possible
protection for your baby. You must not be able to pass more than the thickness of a finger
between the harness and the child.
Installing the child in the car seat
Open the harness buckle by pressing on the red button in the centre of the buckle (1).
Install your child in the car seat, ensuring that his/her back rests correctly against the
back of the car seat.
TUO
1

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis