Features And Technical Specifications; Electrical Connection; Hydraulic Connection - CleanCraft HDR-H 54-15 Bedienungs- Und Wartungsanleitung

according to current regulations in the country where the water cleaner is installed.
• Total Stop: this stops operation of the water cleaner every time the control lever on the cleaner gun is
released.
• Easy Start: this aids starting up the water cleaner by lowering the pressure for the first moments of its
operation.

2 FEATURES AND TECHNICAL SPECIFICATIONS

ELECTRICAL CONNECTION

Mains power supply
Absorbed power
Fuse

HYDRAULIC CONNECTION

Maximum inlet water temperature
Minimum inlet water temperature
Minimum inlet water flow
Maximum inlet water pressure
Maximum priming depth
PERFORMANCE
Maximum water flow
Maximum pressure
Maximum water outlet temperature
Recoil of cleaner gun
Sound level
Operator arm vibrations
WEIGHT AND DIMENSION
Lenght x width x height
Weight
Diesel tank capacity
Detergent tank capacity
2.1 Identification of Components
Please also refer to figures 1 to 2, which are located at the start of these operating and maintenance
instructions.
1. Water inlet connector
2. Main switch
3. Hose reel ring nut
4. Hose reel
5. Hose reel knob
6.
7. High pressure hose
8. Accessory tray
9. Seat for water gun/lance hose
11. Object-holding pocket
10. Plate "Read the manual before... "
12. Identification plate
20
13. Plate "Do not spray towards persons,... "
All features and technical specifications are only indications.
The Manufacturer reserves the right to modify the appliance as it deems necessary..
HDR-H 54-15
230 V / 1~50 Hz
40 °C / 104 °F
5 °C / 41 °F
700 l/h / 185 US gph
0,8 MPa / 8 bar / 116 psi
0 m / 0 ft
540 l/h / 143 US gph
15 MPa / 150 bars / 2176 psi
90 °C - 194 °F
890 x 500 x 820 mm / 35 x 19,7 x 32,3 in
87 kg / 191,8 lb
20 l / 5,3 US gal
4,5 l / 1,2 US gal
14. Power supply wire
15. Plate "Guaranteed sound power "
16. Water gun
17. Lance hose
18. Nozzle-holding head
19. Nozzle cleaning hole
20. Nozzle
21. Lance stand
22.
23.
24. Water gun lever
25. Water gun lever safety stop
2,7 kW
16 A
21,4 N
82 dB (A)
1,7 m/s²
(continues on the next page)