Count Coins In The Coin Cup; Count Coins In Cups - ratiotec RS Serie Bedienungsanleitung

Operation
Caution:
The money scale can only be used correctly if it is placed on a flat surface and it is calibrated before
first use. Use the money scale with the included main plug or with batteries/rechargeable batteries.
All items must be removed from the cup support before every use. To switch on the money scale, press
the Clear button. The standard counting mode will appear.
Note:
All confirmed settings will be saved after switching off the device. The counting procedure always starts
with the lowest denomination of the selected currency. This is signalized with the coin symbol on the
display. The value of the money denomination being weighed appears in the Unit/Reference field.
Please only place the coin or banknote denomination that appears on the display!

Count coins in the coin cup

The provided cup is used to weigh coins. Fill the
weighing cup with the coin denomination shown
on the display and place the coin cup on the mo-
ney scale. After a short time, a signal tone will
arise and the result will be shown on the display.
After removing the counted coins from the sca-
le, the sum is automatically added to the total
amount. Subsequently, the scale displays auto-
matically the next higher denomination. If the
Auto Cont function is inactive, the next higher or
lower coin denomination can be selected using
the < or > button.

Count coins in cups

If all your cups have the same weight, you can
place the filled cups directly on the scale. A prior
calibration of the cups is required before using
your own cups. (Please proceed as described in:
SETUP-menu, CLB CUP). Subsequently, place the
filled cups directly on the cup support.
Tip: If your special cups do not have the same
weight, it is possible to calibrate their different
weight using the additional software. The money
scale can be additionally set up, amongst others,
for other currencies.
6