Special Functions - ratiotec RS Serie Bedienungsanleitung

Special functions

1) Free Weighing function
In addition to counting banknotes and coins, the money scale can also be used to weigh letters.
Activate the Free Weighing function
Press INFO for several seconds in the standard counting mode and the scale will change to Free
Weighing mode.
A g appears on the display and the scale shows the weight of the object placed on it. To return to the
standard counting mode, press INFO for several seconds.
To reset the scale to 0,00g, press Clear in the free weighing mode.
Note:
In order to activate the Free Weighing function, the following must be inactivated in the SETUP menu:
Reference weighing and Float. The maximum weight allowed on the scale is 1kg.
2) Reference Weighing function
Use the Reference Weighing mode if you do not
want to weigh the absolute weight of objects, but
determine their number instead. A previously sa-
ved REFERENCE is used to determine the number.
Activate the Reference Weighing function
First select Reference in the SETUP menu item
and confirm it with OK. Place 20 items of the ob-
jects to be counted directly to the cup support. A
signal tone will denote the confirmation of a suc-
cessful counting procedure. The new reference
weight is saved by pressing the OK button.
Carry out the Reference Weighing function
The Reference Weighing mode is available if you
press INFO for several seconds.
The total weight, the number and the reference
mass of the selected item is displayed. Quit the
Reference Weighing mode by pressing INFO for
several seconds.
Important note:
If the Reference Weighing function is activated, the functions Free weighing and Float are not available.
If two special functions are setup, activate the function that was lastly saved by pressing INFO.
11