ratiotec RS Serie Bedienungsanleitung Seite 9

SETUP menu
Select the SETUP menu by pressing the < and > keys simultaneously.
To select the desired function, press < or >, and confirm this by pressing OK. Press Clear for several
seconds to quit the SETUP menu.
AUTO ADD: This function is activated by factory. The last total is automatically added into a total sum
after removing the amount from the scale.
If this function is activated, Auto Add will appear on the display.
AUTO CONT: This function is activated by factory. The function permits an automatic run of all deno-
minations (from the lowest to the highest). If this function is activated, Auto Cont will appear on the
display.
COIN ROLL:
If the function is activated, the scale switches -af-
ter counting all coin types- to the coin roll mode.
The coin roll symbol will be shown on the display.
Important Note:
Please only place one coin roll per step. The se-
cond roll can be placed only if the last one was
correctly identified.
CURRENCY:
Used to select the desired currency. The RS mo-
ney scale counts Euros, pound sterling and Swiss
francs as factory settings. The chosen currency
will be shown on the display.
Tip: The optional software allows you to count
other currencies.
CLB CUP:
Used to calibrate the coin cup and other cups. Place the cup on the cup support and start the process by
pressing OK. Wait for the signal tone. The calibration procedure must be completed with OK.
FCTRY SET:
Reset all saved settings, including calibration of the coin cup. To reset to factory settings, press OK for
several seconds. The procedure is signalized with three tones.
Note:
After resetting the device to factory settings, the money scale has to be calibrated.
9