Sony XC-77RR/77RR-CE Bedienungsanleitung Seite 14

Location and Function of Parts
DC IN/SYNC/VIDEO connector (12-pin)
When an external HD/VD and VBS signal in not input, the camera is
automatically synchronized with the internal sync signal. When the
camera is synchronized with the external sync signal: the camera
automatically selects the refernce signal (VBS or HD and VD)
according to the input signal.
* Trigger: The reset pulse for the DONPISHA shutter mode.
** You can change the output of pin 9 from internal VD signal to
internal clock signal using an internal switch. The output signal
of pin 9 goes out through the CLOCK OUT connector on the
DG-77RR/77RR-GE,
*** Internal sync signal output: When you use the internal sync
signal, the camera can output a VD and HD signal using the
switch on the internal DR-96 board.
For the internal switch settings, refer to the optional service manual.
\ ^ Signal
Pin No. \ ^
1
2
3
4
5
6
7
8
9
10
11
12
Sync signal
External sync signal
HD, VD
Ground
+12V
Video output
(ground)
Video output
(signal)
HD input
(ground)
HD input
(signal)
VD input/
trigger* input
Internal VD
output (ground)
Internal VD
output (signal)/
Internal clock
output**
Ground
+12 V
VD input
(ground)
VBS
Ground
+12 V
Video output
(ground)
Video output
(signal)
VBS input
(signal)
Internal VD
output (ground)
Internal VD
output (signal)/
Internal clock
output**
Ground
+12V
VBS input
(ground)
Internal sync"
signal
Ground
+ 12 V
Video output
(ground)
Video output
(signal)
HD output
(ground)
HD output
(signal)
VD output
(signal)
Internal VD
output (ground)
Internal VD
output
(signal)/clock
output**
Ground
+ 12 V
VD output
(ground)
14