Connections; Before Connection; Installing Xc-77Rr/77Rr-Ce Joined With; Dc-77Rr/77Rr-Ge - Sony XC-77RR/77RR-CE Bedienungsanleitung

Connections
Before Connection
Be sure to turn off the units to be connected, or the parts in the
units may be damaged.
To remove the connector, pull it out by the plug. Never pull the
cord itself.
Connect the power cord after completing all other connections.
Installing XC-77RR/77RR-CE Joined with
DC-77RR/77RR-CE
AC power cord (supplied)
AGIN
/
XC-77RR/77RR-GE
camera head unit
L ^
to AG outlet
DG-77RR/77RR-GE
XG-77RR/77RR-GE
When you extend a cable between the camera control unit and the
camera head unit, use the GGXG-20P20 (20 m) extension cable.
Fixing the Camera Head Connector of the
Camera Control Unit
When the camera vibrates, horizontal lines may appear on the
reproduced picture. In this case, fix the camera head connector and
the camera cable using the supplied cable fixture.
1
Remove the cover panel.
XG-77RR/77RR-GE
camera control unit
Fix the camera head unit connector using the cable fixture.
P S 2 x 2
(supplied)
(supplied)
Screw (attached to
the cover panel)
15