Sony XC-77RR/77RR-CE Bedienungsanleitung Seite 8

[i;^i(§giMio .ero^ IMnislB^ ®(?1M[Ji^ ' •
Q] AGC (auto gain control) ON/OFF switch
ON: Auto gain control
OFF: Fixed gain (factory setting)
[T] GAMMA (gamma correction) ON/OFF switch
ON: Gamma correction
OFF: Gamma=1 (factory setting)
[H WHTCLP (white clip) ON/OFF switch
ON: Clip level = 110 IRE (XC-77RR)/110 % (XC-77RR-CE)
(factory setting)
OFF: Clip level = 140 IRE (XC-77RR)/140 % (XC-77RR-CE)
[4] INTEG FRM/FLD (Integrate frame/field) switch
FRM: Frame integration mode (factory setting)
FLD: Field integration mode
[T] SCAN 2:1/N0N (2:1 interlace/non-interlace) switch
2:1: 2:1 interiace (factory setting)
NON: Non-interiace
This switch is effective only when the camera is synchronized
with the internal sync signal. When synchronizing the camera
with other equipment using the external sync signal, set this
switch to "2:1".
H] R/RST (restart reset) ON/OFF switch
When the SHUTTER SPEED selectors are set to "000", this
switch sets the restart reset mode to ON or OFF.
When the SHUTTER SPEED selectors are set to other than
"000", this switch selects the shutter mode.
ON: DONPISHA shutter mode
OFF: Normal shutter mode (factory setting)
Set the shutter speed of each shutter mode using the SHUTTER
SPEED selectors [T],
8