Remove The Filter From The Digital Camera; Prepare The Digital Camera; Compatible Digital Camera; Checking Camera Operation - Olympus PT-E03 Bedienungsanleitung

Remove the filter from the digital camera

If a filter is attached to the lens of the digital camera, remove the filter before loading the digital camera
in the Case.
CAUTION:
The digital camera cannot be loaded in the Case while the filter is attached to the lens. Be sure to remove the
filter before loading.

Prepare the digital camera.

Compatible digital camera?

This product (PT-E03) is exclusively for use with the E-410/E-400 Digital Camera.

Checking camera operation

Refer to the digital camera's instruction manual for details on how to make sure the camera is operating
correctly.

Open the Case.

1 Open the two buckles on the Case.
2 Move the attached O-ring remover hook as according to
the drawing on the right.
1 Insert the hook section below the buckle open/close
lever.
2 Slowly pull the O-ring remover.
En
3 If the O-ring remover is not available, push the buckle
lock/unlock lever from the left and right with your thumb
and index finger, and pull up the lever gently.
EN 17