How To Attach And Detach The Camera Table - Olympus PT-E03 Bedienungsanleitung

How to attach and detach the camera table

The camera table inside the front lid of the Case is used to load the digital camera into the Case.
1 Open the two buckles on the Case and open the rear lid.
2 Slide the table towards the rear.
3 To prepare the Case for loading, screw the camera
table's screw tightly into the camera's tripod screw hole.
For details, see "How to attach the camera table to the
digital camera" (P. 19) of this manual.
4 Slide the camera table all the way into the camera table
loading grooves on the front-lid side of the Case.
5 Gently close the rear lid of the Case and close the two
buckles tightly.
CAUTION:
Closing the rear lid of the Case before the camera table is inserted all the way (until it stops), into the camera
table loading grooves could damage the Case and the camera.
En
EN 14