NSK Pana-Max2 M4 Bedienungsanleitung Seite 7

immediately and contact your Authorized NSK Dealer.
• Depressing the Push Button while the handpiece is in operation
may cause overheating, serious technical damage and possible
premature handpiece failure. During operation avoid contact with
any oral tissue that may cause the Push Button to be depressed
while the handpiece is in operation.
• Do not use high acid water or sterilizing solutions to wipe, immerse
or clean the product.
• The products are delivered in a non-sterile condition and must be
autoclaved prior to use.
• Perform regular function and maintenance checks.
• If the product is not used for a long period check it is functioning
correctly before using on a patient.
• To avoid clinical downtime it is recommended that a spare be kept
on hand in case of a breakdown during surgery.
• U.S. Federal law restricts this device to sale by or on the order of a
licensed physician.
2
3. Setting of Air & Water Supply Pressure
Measure the supply pressure at the handpiece / hose connection point
and set the pressure to the value specified on the specification table.
(Fig.1)
For Multi Gauge information refer to Option Parts List.
WARNING
• Do not exceed the optimum pressure specified on the specification
table.
CAUTION
• Do not use air contaminated by dust, moisture and oil.