Jacuzzi j-300 serie Montageanweisung Und Bedienung Und Wartung Seite 37

Electronic Device Connections and Functions
CAUTION: RISK OF ELECTRICAL SHOCK OR EQUIPMENT
DAMAGE! Never install, remove or operate any electrical de-
vice (e.g.Apple Device/MP3/USB/AUX/Bluetooth) while
hands are wet or while sitting partially or fully immersed in
the spa!
IMPORTANT: If stereo unit is "ON" (blue light is illuminated on the
stereo power button) then press the power button on the re-
mote once.
If stereo unit is in "Standby" (red light is illuminated on the stereo
power button) then press the power button on the remote once
to activate the remote (remote LCD display will read "NO LINK").
Press the button again to activate the stereo unit (remote LCD dis-
play will read "WELCOME").
Operating the Radio:
Turn power ON to the stereo unit and remote.
The LCD screen on the remote will display the following: "Wel-
come," "Load," "Radio" and the station number.
You can use the seek button to search for frequencies. You can
save up to 3 stations as presets.
Follow the steps below to set a station:
a. Find a station you want to save.
b. Press and hold one of the three preset buttons. The station
number on the display will quickly flash to confirm the setting.
To set the additional two stations, conduct this step again.
Connecting Your Apple Device and MP3 Player Using the
USB:
- Locate the USB port in the stereo locker.
- Use a 30-pin cable for compatible devices or a cable provi-
ded with your device.
- Connect the USB end of the cable into the USB connection on
stereo.
- Connect the 30-pin end of the cable to the Apple device /MP3
Player (purchased separately).
- After connecting the cable to both devices, set the player into
the rubber holding base.
USB USB
A AUX UX
purchased separately
Operating USB/MP3/Apple device.
- Turn power ON to the stereo unit, the player and the stereo re-
mote.
- The LCD screen on the remote will display the following: "Wel-
come," "USB," "Load," "Apple" (final display will vary depending on
the device connected). All functions are performed through the
remote.
- While the music is playing the remote screen will display and-
continually scroll through the following: Artist, Album, Song
and Track information.
- For operational functions refer to the "External Media Device
Playback" section.
Operating the USB drive:
- Plug in your USB device into the "USB" connection on the stereo.
- Turn power ON to the stereo unit and the stereo remote.
- The LCD screen on the remote will display the following: "Wel-
come," "USB," "Load," "TOL XX" (final display will vary depending
on the whether the USB holds folders or files). All functions are
performed through the remote.
- While the music is playing the remote screen will display and-
continually scroll through the following: Title, Song, Artist, Al-
bum, Dir, Music and Track information.
- For operational functions refer to the "External Media Device
Playback" section.
Connecting Your Auxiliary Player Using the 3.5 mm Cable:
- Plug one end of the cable to "Aux" connection on the stereo.
- Plug the other end of the cable into the phone jack connection
on the Apple device/MP3 Player.
- Press the Mode button on the remote to "AUX IN".
- All playback operations are conducted via the Auxiliary Player.
The stereo remote functions do not work on the external Aux-
iliary Player (except volume control).
USB USB
AUX A UX
Connecting Your Bluetooth Device:
- Turn power ON to the stereo unit.
- From your Bluetooth device, make sure the Bluetooth feature is
ON.
- Follow the pairing instructions for your Bluetooth device and
connect to the "BLUEWAVE" device that appears on your screen.
- When asked for a password, enter the code "0000."
- The remote LCD screen will display, "BT AUDIO" if the process
was successful.
Operating Your Bluetooth Device:
- Press the seek up or down buttons to scroll through the tracks
USB USB
A AUX UX
(on the remote).
- Press the volume up or down buttons to adjust volume level be-
AC A ACCESSORY CONNECTED AC A A C C C E S S O R R Y Y Y CO NN EC TE TE E D
tween 0 to 30 (on the remote).
- Any other playback operations are conducted via the Bluetooth
device.
37