Target Group; Symbols And Formats - Waeco CoolAir CA-1000-AC Einbau- Und Bedienungsanleitungen

_CA-1000.book Seite 32 Freitag, 28. Juli 2006 10:35 10
Conventions in this manual
2.2

Target group

The installation and configuration information (see chapter "Installation"
on page 35 and see chapter "Configuration of system software" on
page 40) in this manual is intended for qualified personnel at workshops
who are familiar with the guidelines and safety precautions to be
applied.
The information on the device (operating instructions, handling the
device, safety instructions etc.) is intended for the user of the roof air
conditioner.
2.3

Symbols and formats

You will come across certain symbols and formats in this documentation.
This is what they mean:
Format
Bold
➤
✓
Indication of:
Possible risks of injury to the fitter or user
and
Possible damage to the device
Indicates a potentially dangerous situation which could arise during the
installation or operation of the product and cause damage to the device or
environmental or economic damage.
Special information on handling the product
32
Explanation
Important information in the text
which may not be misunderstood
Instruction text
Results of an action
Example
Set the switch (3) to the
COOLING symbol.
➤
Remove the positive (+)
terminal connector from the
supply battery.
✓ The device is now ready for
operation.
CoolAir