Cable Winder; Initial Use - Silvercrest SWC 2400 A1 Bedienungsanleitung

Cable winder

A cable winder 5 is arranged on the base 4 of the appliance . This winder 5
allows you to adjust the length of the cable to your local requirements .
CAUTION! PROPERTY DAMAGE!
► Always guide the cable through the corresponding recess on the base 4,
which is intended for this purpose, in order to ensure stability .

Initial use

WARNING! RISK OF INJURY!
► Always and only use freshly drawn mains water in the kettle! Do not consume
any water that is not certified as potable . If you do, you are taking a risk
with your health!
Before starting the appliance up, make certain that ...
–
–
1) Open the lid by pressing on the release button 1 .
2) Fill the appliance with water up to the MAX mark and let it come to a full
boil once – as described in the next section .
3) After it has boiled, pour this water away .
4) Rinse the kettle out with clear water .
5) Refill the appliance with water up to the MAX mark, and then bring it to the
boil . When done, pour this water away also .
6) Rinse the kettle out with clear water .
The appliance is now ready for use .
SWC 2400 A1
the appliance, plug and power cable are in a serviceable
condition and ...
all packaging materials have been removed from the appliance .
GB │ IE │ 21 ■