Boiling Water - Silvercrest SWC 2400 A1 Bedienungsanleitung

Boiling water

RISK! ELECTRICAL SHOCK!
► Never place the electrical base 4 close to water – this would be a
potentially fatal risk!
WARNING! RISK OF INJURY!
► Always use freshly drawn water . Do not consume any water that has already
stood in the kettle for longer than one hour . Do not reboil water that has cooled
down . Always pour old water away . Microbes could have formed in it!
NOTE
► Always ensure that the ON/OFF switch
the mains plug is unplugged and the appliance is standing on the base 4 .
Otherwise the appliance could heat up unintentionally as soon as the
mains plug is plugged in again .
1) Lift the kettle off of the base when filling it!
2) Press the release button 1 and open the lid .
NOTE
► When filling it, hold the kettle upright . This is the only way to read the
markings on the scale 2 correctly .
3) Fill the jug up to no more than the MAX mark with water .
4) First close the lid, then place the kettle on the base 4, so that it sits securely
on the base 4 .
5) Now insert the plug into the mains power socket .
6) Push the ON/OFF switch
WARNING! RISK OF INJURY!
► For safety reasons you should not open the lid when the water is boiling or
extremely hot . There is a risk of scalding .
7) The light in the ON/OFF switch
up .
8) As soon as the water is boiling, the appliance will switch off automatically, the
ON/OFF switch
■ 22 │ GB │ IE
3 downwards so that it engages .
3 shows that the appliance is now heating
3 clicks upwards and the light goes out .
3 is not pressed down when
SWC 2400 A1