Care And Cleaning - Gastroback Vital Mixer Plus Bedienungsanleitung

Problem
The results are inhomo-
geneous.
You can not get snow
from ice cubes.
The lid sticks to the jar.
You cannot unscrew the
sealing screw.

CARE AND CLEANING

WARNING
younger than 8 years and animals. Always unplug the appliance, before remo-
ving the jar or moving or cleaning the appliance. Do not hold your hands or any
foreign objects into the jar or coupling on the motor base with the appliance
still connected to the power supply. Always handle the blade assembly with cau-
tion to avoid injuries, as the blades are very sharp.
CAUTION
uneven surfaces to avoid that the parts fall down or fall over. Do not place any
parts of the appliance on hot surfaces. DO NOT place the motor base or power
cord into an automatic dishwasher.
EN
52
Reason
Ingredients cling to the
inner walls of the jar.
The ice has not been cold
enough and/or starts
thawing already.
The jar is too warm.
You are not using the opti-
mum method.
The jar has been wet,
when filling in the ice.
The lid is still locked to
the jar.
The sealing screw must be
turned on tightly for get-
ting a proper seal.
– Always keep the appliance out of reach of children
– Do not place the motor base or jar on inclined, slipping, or
The Solution
Unplug the appliance and remove the jar. Push down
the ingredients sticking to the inner walls of the jar. The-
reafter, operate in short pulses. Especially frozen ingre-
dients and ice cubes should be processed in short pulses
of 2-5 seconds.
For best results, use ice straight from the freezer.
Just before processing, cool down the jar in the refrige-
rator.
Try operation in short pulses. The ice starts melting, when
the processing time is too long.
Ensure that the jar is completely dry, before filling in ice.
Before removing the lid, always press the opening button
at the handle of the jar.
You should place the jar upside down onto a stable
surface and hold it by the handle for disassembling the
sealing screw. Ensure to turn the sealing screw in the
correct direction (counter-clockwise for unscrewing). If
required, ask a second person for help.